0519-83867299

/

产品中心

/

旋转给料阀

/

高温水冷卸料阀

Number of views:

1000

高温水冷卸料阀

Retail price

0.0

元

Market price

0.0

元

Number of views:

1000

Product serial number

Quantity

-

+

Stock:

Category

返回列表

联系我们

咨询服务热线： 0519-83867299



1

成果展示企业文化

详细描述

Parameters

1、技术要求

1.1、技术参数：

1.1.1、工艺参数：参数见表1。

表1 工艺参数

设备号加热介质进料温度（℃）进口压力（kPaG）出口压力（kPaG）物料流量（kg/h）堆积密度（kg/L）

X0101 氟化钠和氟硅酸钠 650

（四台设备输送介质中均含有四氟化硅气体，要求设备具备防止气体外泄能力）

1.1.2、夹套介质参数：介质为冷却水，进出水温度分别为32℃和37℃；

1.1.3、管口要求：管口采用法兰（HG/T20592-2009）连接，压力等级PN16，密封面RF。其中物料进口WN(B)150-16 RF S=5.5、出口WN(B)150-16 RF S=5.5；冷却水进出口采用PL法兰，口径厂家设计；

1.1.4、材质要求：接触物料的材质采用310S；设备本体材质316L，夹套材质均为304；

1.1.5、密封要求：需具备良好的密封性能，防止气体反串或外泄；

1.1.5、电气要求：配备变频调速电机，防护等级IP54，电源380V 50HZ；

1.1.6、控制要求：4套装置各自配备控制柜（柜预留一个水冷螺旋的电气元器件空间），且具备PLC控制，下料量变频可调，控制柜预留去DCS接口（采用ModBus RTU通讯协议，并提供地址设计一览表）；

1.1.7、其它要求：轴需配备水冷系统。

Keyword:

高温卸料阀水冷卸料阀

Scan the QR code to read on your phone

相关案例

PLO

Automatic unpacking, negative pressure feeding and weighing system

Different from the positive pressure conveying system, the negative pressure system can use the suction nozzle to realize the material conveying in the open normal temperature and pressure container, and the material temperature will not rise during conveying. In the negative pressure conveying system, there is no leakage of dust and gas. The conveyed material will not heat up, it is especially suitable for hazardous materials, and the cleanliness of the surrounding environment is maintained high.

Positive pressure lean direction rotary valve, point-to-point conveying system

This case is a rotary valve positive pressure and lean direction pneumatic conveying system. The rotary valve is generally suitable for pneumatic conveying at low and medium pressures. General bulk materials can be conveyed by rotary valve pneumatic conveying. The technical characteristics of this conveying system are that the conveying pressure is generally between 1 and 3 bar. In time, this system is point-to-point transportation. The rotary valve pneumatic conveying can also realize multi-point feeding and multi-point unloading.

Elutriation separation system

The elutriation separation system uses the difference in velocity between the gas and solid phases in each area to make the fine dust attached to the surface of the pellets fall off by the shearing action of the gas on the solid surface. Core equipment: elutriator, dust remover, mainly used to separate small crystal grains and fiber dust in granular products. At present, Ferguson has many years of research and design experience, which can efficiently remove dust and drawing impurities between plastic particles.

留言反馈

Username used for comment:

客户留言

Description:

* Message content：

Name：

性别：

男

女

Telephone：

E-mail：

* Verification code:

With the development trend of mechanical automation instead of traditional human production, we provide customers with high quality, high efficiency, intelligent, environmental protection production system equipment.

Contact Information

Add：

No. 58, Songtao Road, Zhonglou District, Changzhou City, Jiangsu Province

Fax：

0519-82076059

Tel：

0519-83867299

Contact

QQ

Tel

0519-83867299

Wechat

TOP

苏ICP备15012327号-1 Powered by www.300.cn