0519-83867299

/

产品中心

/

人工投料站

/

人工拆包投料系统

Number of views:

1000

人工拆包投料系统

Retail price

0.0

元

Market price

0.0

元

Number of views:

1000

Product serial number

Quantity

-

+

Stock:

Category

返回列表

联系我们

咨询服务热线： 0519-83867299



1

成果展示企业文化

详细描述

Parameters

1.粉体物料正常输送流程

物料来料分罐车，吨包，标袋，散料等

罐车由正输送至相应料仓，吨包与标包则由相对应的拆包机拆后输送

散料输送则由人工或自动化输送为主

对应料仓后物料输送则分为机械输送，气力输送等

机械输送包含管链输送，螺旋输送，皮带输送，刮板输送，斗式提升，移动小车等

气力输送含正压密相输送，正压稀相输送负压稀相输送等

物料输送由需相对应的输送工艺，物料特性，产能，要求决定输送方式

2.管链输送与气力送优缺点：

1）管链输送机结构简单紧凑，可以环形水平、垂直、弯曲或三维布置。

2）管道可全封闭式输送，无粉尘溢漏，高效环保。

3）物料输送过程中，同种输送能力情况下，管链能耗低，可最大限度的降低运行

4）维护少，维护成本低，使用寿命长。

5）慢转数摩擦小，最大限度的降低噪音。

6）运行速度慢，可最大限度的保证物料的完整性。

7）可实现防爆设计和气密设计。

8）可以带料重载起动。

9）可多点卸料、多点进料、弧形阀

10）气力输送管道能残留少，输送距离远，同比管链，管链残留大。

11）气力输送能耗大，对管道损耗大

12）气力输送对物料挑剔性高。

Keyword:

人工拆包人工投料站人工投袋

Scan the QR code to read on your phone

相关案例

PLO

Automatic unpacking, negative pressure feeding and weighing system

Different from the positive pressure conveying system, the negative pressure system can use the suction nozzle to realize the material conveying in the open normal temperature and pressure container, and the material temperature will not rise during conveying. In the negative pressure conveying system, there is no leakage of dust and gas. The conveyed material will not heat up, it is especially suitable for hazardous materials, and the cleanliness of the surrounding environment is maintained high.

Positive pressure lean direction rotary valve, point-to-point conveying system

This case is a rotary valve positive pressure and lean direction pneumatic conveying system. The rotary valve is generally suitable for pneumatic conveying at low and medium pressures. General bulk materials can be conveyed by rotary valve pneumatic conveying. The technical characteristics of this conveying system are that the conveying pressure is generally between 1 and 3 bar. In time, this system is point-to-point transportation. The rotary valve pneumatic conveying can also realize multi-point feeding and multi-point unloading.

Elutriation separation system

The elutriation separation system uses the difference in velocity between the gas and solid phases in each area to make the fine dust attached to the surface of the pellets fall off by the shearing action of the gas on the solid surface. Core equipment: elutriator, dust remover, mainly used to separate small crystal grains and fiber dust in granular products. At present, Ferguson has many years of research and design experience, which can efficiently remove dust and drawing impurities between plastic particles.

留言反馈

Username used for comment:

客户留言

Description:

* Message content：

Name：

性别：

男

女

Telephone：

E-mail：

* Verification code:

With the development trend of mechanical automation instead of traditional human production, we provide customers with high quality, high efficiency, intelligent, environmental protection production system equipment.

Contact Information

Add：

No. 58, Songtao Road, Zhonglou District, Changzhou City, Jiangsu Province

Fax：

0519-82076059

Tel：

0519-83867299

Contact

QQ

Tel

0519-83867299

Wechat

TOP

苏ICP备15012327号-1 Powered by www.300.cn